There are very few people in this world who can claim that they’re not afraid of spiders. If you’re amongst those few superheroes, kudos to you!

However, for the rest of us, spiders and spiderwebs remain nightmarish! Yet, that doesn’t exempt us from cleaning.

If you were ever assigned with cleaning cobwebs from ceilings, you know how difficult it may get. To make your life easier, we’ll show you how to clean spider webs from high ceilings

We’ll also see what tools you can use to make the task easier and also what measures you can take.

By just keeping a few things in mind and following the easy steps, you’ll be able to banish cobwebs from even the hardest to reach places.

So, without further ado, let’s see how it’s done.

What You’ll Need

Before delving into the steps, let’s take a glance at the list of things you’ll need to get this work done. Check the list beforehand and tick off everything you already have.

Depending on the height of your ceiling, you’ll need a step ladder or a duster with an extendable handle, or both.

Although we’ll go into the details a bit later, it’s a good idea to invest in both if your ceiling is higher than 20 ft.

That’s because a tool or step ladder will give you some added height and as a result, more stability. This is pretty crucial when it comes to cleaning the cobwebs with precision.

4 Steps on How to Clean Spider Webs from High Ceilings?

Cleaning cobwebs are pretty hard, to begin with. They’re icky and unless it’s an empty web, there’s always the impending fear of having to face an angry spider.

But add some height to that, and the task becomes twice as difficult. You lose grip and the precision to completely get rid of the cobweb.

Although this is a bit of a challenge, it’s not all that hard once you have all the right equipment.

Let’s see how it’s done.

Step 1: Line the floors with plastic sheets

Before we get into the details of cleaning, we must first protect the floor. Prepping the surface of the room you’re about to clean is absolutely mandatory, since the cobwebs won’t end up on the couch.

Unless you want some baby spiders to crawl on your face in the middle of the night, protect your bedding and floors beforehand. This is super important, especially if you have carpeted floors.

To do this, simply buy some big plastic sheets and line your furniture and floors with them.

On another note, this tip works wonders even when you’re cleaning a greasy ceiling fan. No matter what the task is, a little bit of protection goes a long way!

Step 2: Extend the pole and clean the cobwebs

Now comes the star of our performance- an extendable duster. When it comes to high ceilings, just getting on a step ladder may not always cut the chase for you.

Especially if your ceiling is more than 20 ft high, you may need to use both a stepladder and an extendable duster to get the job done.

Now depending on your home style, we’ll leave this choice to you. Simply extend the duster until you can easily reach the spot that’s covered in cobwebs.

If you find that you’re not really having precision or control with such a long handle, then shorten it and climb up a stepladder.

Try different combinations until you feel comfortable and have a good grip. In case you opt for a non-extendable duster, you could always check out some amazing cobweb dusters.

After all, you’re the boss.

Step 3: Clean the duster

Now that you’ve removed the cobwebs from the ceiling, it’s time to clean the brush.

If your ceiling isn’t too high, skip the duster. A handheld vacuum can work wonders instead.

This saves you from a lot of cleaning and is totally mess-free! However, when you reach great heights, there comes great responsibility.

So, with a high ceiling, the cleaning gets a little troublesome. Back to the topic, to clean cobwebs from the duster, wear some gloves. Gloves will prevent you from getting any bites or rashes from hidden spiders.

Also, it’ll give you that extra bit of courage which is needed to handle spiders.

Then, remove them by hand and discard them in a plastic bag. If you see any live eggs in them, then you may want to follow up on the next step.

Step 4: Spray vinegar

Last but not least, what to do if you have a spider infestation at home? Although if serious, we suggest you call pest control and not take matters into your hand.

That’s because spider infestations may sometimes be dangerous and you’ll have no way of knowing unless you’re bitten by a poisonous spider. So, don’t take the risk.

But if it’s just a few spiders here and there, then a homemade solution of vinegar and water may just do the trick.

Mix one cup of vinegar with two cups of water and mix it well. After that’s done, pour it into a spray bottle and spray it on any areas where spiders may choose to make their home.

This repels spiders and can also potentially kill spider eggs.

Bottom Line

So that’s a wrap on the topic. We hope you learned something new and remember, always call pest control if you notice a spider infestation.

If you liked our tips on how to clean spider webs from high ceilings, don’t forget to tell us in the comments below.

We’d love to hear from you. Bye until next time!

As we can see, you’ve sworn to clean every last speck of dust in your home. You’re just finished and the place looks spotless! But have you looked at your ceiling fan?

If you’ve ever been in this situation where a dirty grimy ceiling fan just ruined your clean home, you know the pain!

However, fret not! In this post, we’ll show you how to clean greasy ceiling fans at home, without a fuss. This includes 5 easy steps that cover everything from grabbing what you need to final finishing touches.

After you’re done, you’ll be able to sleep at peace knowing that your home is finally sparkling.

Enough of the idle talk, put on your cleaning gloves, and let’s get right to work, shall we?

How to Clean Greasy Ceiling Fans?

Greasy ceiling fans are mainly due to the dirt and dust which accumulate over a surface when not cleaned periodically. Now you may clean and mop your floors every other day.

But how often does the ceiling fan get attention? Moreover, oil and grease that emit from cooking, also settle on the ceiling fan sometimes.

If there’s no escape route for this gas, it ends up making your walls and ceiling fan quite grimy.

Keep that in mind while we see how we can remove this mess easily.

Step 0: Gather everything you’ll need

First things first, we’ll need to see if we have all the required items. It’s a good practice to do this beforehand.

That way, you won’t have to take a break and head to the store to buy a ladder at the last minute. So, let’s take a look at the list.

• Stepladder/ tool
• Plastic sheets
• Rags
• Cleaning solution
• Water

And that’s it! Most of these are household items that you probably have lying around. Now that we’ve gathered everything we’ll need, let’s dive in.

Step 1: Cover floor and furniture

Whenever you clean dirt from the ceiling, it’s always a good idea to do some prior prep beforehand.

That’s because dirt can easily fall and make your whole room a mess. In the worst case, it may also stain your favorite bedsheet.

To save yourself from all that headache, buy some big plastic sheets and cover everything where dirt may go. Don’t be stingy and simply cover the area directly beneath the fan.

Take some extra time and make sure to cover the corners where the ceiling dirt can easily settle but doesn’t want to get out.

Moreover, covering the floors is also pretty important when you’re removing spider webs from high ceilings. Hence, don’t contemplate and just line everything with plastic. After all, better safe than sorry!

Step 2: Dust off loose dirt

Now let’s say you have the toughest grease stains stuck on your ceiling. If you start cleaning with a wet cloth directly, things may go south.

This is because all the loose dirt will stick with the tough dirt and form a tough dirt layer that takes ages to clean.

Instead, take a dry rag and brush off the excess dust and dirt. This way, you can easily clean off the loose top layer. However, make sure that you have a protective mask on.

This will save you from a lot of sneezing and coughing, especially if you have allergies. Also, a cap will protect your hair from dirt and you won’t have to run to shampoo.

Now even if you’re using a cobweb duster to remove cobwebs, these precautionary steps are a must!

#	Preview	Product	Rating
1		DocaPole 36 Foot High Reach Dusting Kit with 7-30 Foot Extension Pole // Cleaning Kit Includes 3...	No ratings yet	Buy on Amazon

After you’ve cleaned off all the loose dust, it’s time to face the tougher tides.

Step 3: Wipe with a wet cloth

Now that the top layer of dirt and dust has come off, it’s now time to target the hard dirt. Before we get into battle, take an old cloth or towel and soak it in some warm water.

After that, wring out the excess and use this to wipe the dirt that is stuck to the fan blade. Even if it doesn’t remove everything, you’ll see that the color of the blades will start to show.

Now the point here is not to clean off all the tough dirt. That’s not going to happen with plain warm water. However, we’re trying to clean off some of the dirt and make it less tough.

This way, it’ll be way easier for you to cut through the grease with an actual cleaner. Even if it seems like an extra step which takes up time, take the few extra minutes.

You’ll thank us later when you see how easily the grime comes off in the next step.

Step 4: Use a degreaser

#	Preview	Product	Rating
1		WD40 Company 300363 Specialist Degreaser Liquid 1 Gallon	1,585 Reviews	Buy on Amazon

Now it’s time to use a cleaning agent or a degreaser. This will cut through the dirt and make your fan gleam with pride!

Even if everything’s going south, you’ll be able to lay in bed and be proud of yourself when you look up to the shining fan.

To clean the fan that well, you can head out and purchase a store-bought degreaser. Or, you can easily make one at home yourself. If you’re clueless on how to make one, here’s a quick recipe.

How to Make a DIY Degreaser?

To make a cleaning solution that will cut through the grease like a sharp sword, here’s what you’ll need

• White vinegar
• Water
• Dish liquid
• Baking soda

Take a spray bottle and mix vinegar, baking and water in the ratio 1:2. After you’ve done so, add a few drops of any dishwashing liquid and your homemade degreaser is ready.

Due to vinegar and baking soda, it’ll be able to cut through even the toughest grease. After a wipe, you’ll be left with gleaming fan blades.

To achieve this feat, spray some cleaner on a rag and give the fan blade a good wipe down. To speed things up, you can spray this liquid on the grease and leave it on for 5 minutes.

Then take a rag and soak it in the degreaser. Next, wipe away and you’ll be surprised at how easily the dirt is coming off.

No harsh scrubbing or rubbing is even required!

Step 5: Wash with water and dry

Now we’re inching close to the grand finale. After all the grease and dirt are removed, it’s time to give the fan blades a final cleanup.

Why, you ask? Well removing any residue from the cleaning agent will keep the fan cleaner for longer. Moreover, it will prevent any long-lasting damage to the fan blades.

Since the degreaser contained vinegar, prolonged exposure may cause the paint to fade or chip off.

Therefore, to be safe, clean with a wet towel and let the fan dry. Switch the fan on and it’ll dry in no time at all!

Conclusion

And that’s all from us folks. We hope that you enjoyed reading up on these tips and learned something new.

If you have any more questions on how to clean greasy ceiling fans, don’t forget to let us know in the comments below.

Until then, stay happy and alive!

Did your pets accidentally pee all over your carpet? Sometimes if your apartment has strict rules, you may have to pay a fine or even risk getting evicted!

If that sounds like your problem, then we’re here to save the day. Learn how to hide urine stains from a black light and this will be a trouble of the past.

We’ll show you a few foolproof tricks which require items that you probably already have on your shelf.

Without further ado, let’s jump right in, shall we?

Why Does Urine Show Under Black Light?

Now you have gotten a notice from your landlord that there will be an inspection of your apartment with a black light.

Although you might be worried sick, have you ever stopped to wonder why urine shows up under black light? What is the mechanism behind it?

If you’ve ever tried shining blacklight over a urine stain, you’ll find that it has a yellow glow!

This is mainly due to the phosphorus which is present in the urine. This element has a yellowish glow of its own, which is just amplified under the energy of black light.

Moreover, urine contains uric acid and molecules of blood which also show up under black light.

Now that we know what is the culprit behind this glow, let’s see how we can stop it.

Here’s What You’ll Need

Before delving into the steps on how to remove the stain that’s ruining your sleep, let’s see what are the things that we’ll need to get started.

It’s best that you take a look at the list and assess what you already have and what you don’t. This systematic approach also works great while planning to clean tree sap off windows.

Here’s the list.

• Bleach
• Enzymatic cleaner
• Black light
• Sponge
• Water

How to Hide Urine Stains from Black Light?

Let’s look at some simple steps to get rid of even the toughest urine stains. After you’re done, the carpet will look as good as new!

Step 1: Search for urine stains with a black light

When you want to clean any urine stain that doesn’t show up on an inspection, you need to first invest in a black light yourself.

This is because stains that are invisible to the naked eye can look like a huge disaster under black light. Get a black light and inspect your whole apartment and rugs.

#	Preview	Product	Rating
1		UV Flashlight Black Light , Vansky 51 LED Blacklight Pet Urine Detector for Dog/Cat Urine,Dry...	21,378 Reviews	Buy on Amazon

Also remember, if you have a dog who’s had a little accident on your rug, there’s a chance that it won’t show up under black light. It’s only the cat or human pee that has a fluorescent glow to it.

Step 2: Use a cleaning agent

After you’ve identified which part of your carpet or sofa needs cleaning, it’s now time to get to work.

Now although soap and water are great for cleaning mineral spirits, they don’t do much in this case. The urine stain will still be vivid under the glow of the black light. So here are the cleaning agents you can use instead.

Bleach

#	Preview	Product	Rating
1		Clorox Clean-Up CloroxPro Disinfectant Cleaner with Bleach Refill, 128 Ounces (35420) Package May...	No ratings yet	Buy on Amazon

Bleach is a great way to clean stains of any kind. Although this is a bit unconventional when it comes to removing urine stains, it doesn’t hurt to give it a try.

However, bleach may also alter the color of your sheets or carpet. So, find out whether your surface is bleach friendly by calling up the shop from where you bought it.

If that’s not an option, you can always do a patch test on an inconspicuous area. 

Moving on, to make the bleach solution, mix a cup of bleach in a gallon of water. Mix this well and then take some of the solution in a spray bottle.

Next, spray it on your urine stain and then scrub it with a sponge to lift the stain.

Enzymatic cleaner

#	Preview	Product	Rating
1		Nature’s Miracle P-96992 Advanced Stain and Odor Eliminator Cat, For Severe Cat Messes, Updated...	No ratings yet	Buy on Amazon

Sometimes bleach still fails to work and you might notice that the urine stain is still showing up under the blacklight. In such a case, a designated enzymatic cleaner will definitely save the day.

If it sounds too good to be true, here’s how it works. Remember when we told you that one of the main reasons for urine to glow was phosphorus and uric acid?

Well, an enzymatic cleaner breaks down all of that stuff. Simply pour some on the stain and leave it on to do its magic.

However, all enzymatic cleaners don’t have the same effect. Here are some enzymatic cleaners that we recommend.

Step 3: Wash the area well

After you’ve used the cleaner to clean the area, it’s time to give the carpet a final cleanse. To do this, we’ll only need lukewarm water and some towels.

Did you know that washing is also a great way to remove fingerprint dust from virtually anything?

Soak the old towel in the lukewarm water and wring the excess water out. Then, clean off any of the residual cleaners which are left.

If you use bleach to clean your carpets, then this step is a must. Otherwise, bleach could discolor or ruin even the most resilient fibers.

However enzymatic cleaners don’t need to be washed off in general. Yet, we still recommend giving it a final clean just to be safe.

Step 4: Let the area dry

Last but not the least, you’ll want to let the area dry. This may seem like a no-brainer, but you’d be surprised at the number of mold problems people face just because they skimp on drying carpets and sheets properly.

Even if you use a water spot remover, you mustn’t skip the drying part.

Therefore, leave a fan on or keep the windows open so that the material has fully dried.

Conclusion

That’s all from us on this topic. Remember that if everything else fails, you can always just replace the fabric or rug.

We hope you enjoyed reading our post on how to hide urine stains from a black light.

Let us know your feedback and opinions in the comments below. Until then, stay safe!

We all desire clean homes and fresh carpets. If you have a clean freak hidden somewhere deep inside, then you might give attention to every speck of dust that’s lying around.

However, have you ever wondered how dirty your vacuum cleaner may be?

The device that you use to clean your home has the most dirt in it. Sanitizing vacuum cleaner is not only healthy, but it’s also crucial when you want to avoid dirty carpets.

In this post, we’ll show you exactly how it’s done. From going over the parts that you must clean and how to do it, we’ll leave no stone untouched. Let’s see how it’s done.

How to Sanitize a Vacuum Cleaner?

A dirty vacuum cleaner can make cleaning pretty useless.

Since a vacuum cleaner is a device, cleaning it requires you to have a bit of knowledge of its make and model.

You see, the cleaning procedure is going to have a sea of difference when you take a regular vacuum cleaner with a bag or a bagless canister vacuum cleaner.

The first step that we suggest you do, is take out your user manual. Then give it a read while sipping your evening tea. Take your time and you’ll find that things automatically get a lot easier.

Now that you have an image on the model of your vacuum cleaner, let’s see how it’s done.

Step 1: Cleaning the bag / canister

If your vacuum cleaner is equipped with a bag, then this is where all dust and debris get collected. So, after a while, this bag is bound to get filled.

If you don’t replace the bag periodically, then you’ll notice the efficiency of your vacuum reducing, since the dirt has nowhere to escape.

We don’t suggest that you reuse the bag. Instead, take it out and seal it in a plastic bag and dispose of it carefully. Next, use a disinfectant area around the area to remove any bad smell.

After that, you can install a new bag altogether.

Now in case you have a canister vacuum cleaner, things get a little different. It’s best if you clean out the canister each time you use the vacuum cleaner.

Also, don’t forget to clean the hose of the vacuum cleaner since this is where dirt could also accumulate and block the suction.

Step 2: Cleaning the filters

Filters are another place that accumulates dirt and can make your vacuum cleaner dirty. When it comes to cleaning filters, you must determine what kind of filter you have.

These normally come in two types: washable and non-washable.

Washable filter

If your filter is washable, things are quite easy. Just run some warm water and hold the filter under it. Warm water is a great way even to banish carpet streaks!

Beware, your sink may need a scrubbing after all the dirt that is going to wash off.  Next, you want to let the filter air-dry for at least a day before you reattach it to the vacuum.

Also, it’s best that you avoid soapy solutions if the manufacturer’s guide doesn’t allow it.

Even if it’s great for taking care of carpet pad stains, in most cases soap solutions can do more harm than good and damage your filters.

Non-washable filter

However, if your filter can’t be washed, then you can either dry clean it or replace it altogether. To clean it, insert the filter in a plastic bag and then tap it against the floor.

This will make any loose dirt fall into the plastic, without dirtying your floors. Next, just attach it back to the vacuum cleaner.

Step 3: Cleaning the brush heads

Now that we’ve cleaned both the bag/canister and the filters, it’s time to give the brush heads a cleanse.

Often, you may find pets or human hair stuck in this. Moreover, it’s a hotspot for dust and other debris to get stuck.

If you find a lot of hair that’s collected, simply wear some gloves and pull it free.

If it’s tangled badly, then take out a pair of scissors and you’ll get the job done. In fact, blunt scissors or putty knives are also a great way to get fabric paint out of carpet.

Next, immerse the brush heads in some warm soapy water and then give them a good scrub. This will remove any further debris that may be stuck.

Step 4: Cleaning the exterior

After cleaning your carpets from time to time, the exterior of your vacuum cleaner also can get super dirty.

Just like some stains blend in with some carpet colors, the same goes with vacuum cleaners. If you have a dark-colored one, you may not realize how dirty it gets.

In order to clean your vacuum cleaner, you’ll need a disinfectant spray. Although there are some great options in the market, you could also make one at home.

Simply mix one cup of water with one cup of rubbing alcohol and your disinfectant is ready. Pour it into a spray bottle and mix well. Additionally, you could add some essential oils to give your spray a beautiful scent.

Spray this on any exposed area of the vacuum cleaner and wipe it off with a cloth. Don’t forget the nooks and crannies as this is where dirt accumulates the most.

Remember to spray liberally and then let the vacuum cleaner air dry after you’ve wiped it off. This disinfectant spray can be used for any cleaning purposes around your home.

Wrapping up

So that was our post on how you can disinfect your vacuum cleaner. Remember, if the vacuum starts smelling, it might be time to empty the bag.

We hope you enjoyed your time with us. If you have any residual doubts about sanitizing vacuum cleaner, don’t forget to let us know in the comments.

We love getting your feedback. Until next time, stay happy and stay clean.

Was your home a crime scene due to which authority searched for fingerprints? Well other than the stress of such a situation, we often must also tackle the residual dust.

If this sounds like your story, then you’re probably trying to find a solution on how to remove fingerprint dust.

In this post, that’s exactly what we’re gonna talk about.  If you’re looking for easy methods for combating this problem, then look no further than this post.

Take out your notepad as we show you how it’s done. Let’s start!

How To Remove Fingerprint Dust?

Now before we go into all the details about cleaning this mess up, what exactly is fingerprint dust?

You might have seen movies in which detectives sprinkle the powder on fingerprints to detect them. Usually, when we touch an object we leave behind some grease and dirt.

This powder sticks to such components and makes the fingerprint visible or identification. In general, fingerprint powder is made up of black ferric oxide or rosin.

Depending on the manufacturer, it could also contain mercury, copper or even lead. Anyways, it’s not exactly the safest thing to come in contact with your skin. Moreover, prolonged exposure could also harm your carpets or furniture.

Let’s see how it’s done-

Step 1: Gather all the necessary items

First things first, we’ll want to grab everything we need. That way, you won’t have to go running to the department store in the middle of the cleaning project.

Most of these items are ones that you already have at home. Now that you’ve got what you need, let’s look at how to remove this pesky fingerprint dust.

Step 2: Vacuum the area

Before anything else, we need to start by removing all the loose powder possible. The easiest way to do this is through a vacuum machine. Just like an effective water spot remover, a vacuum makes life much better!

Simply attach a precise brush nozzle and turn the vacuum to the highest setting possible. Then, brush through any surface where you see any fingerprint dust residue.

Preview	Product	Rating
	BISSELL Cleanview Swivel Pet Upright Bagless Vacuum Cleaner, Green, 2252	32,735 Reviews	Buy on Amazon

Don’t forget to clean the crooks and crannies of your furniture and windows, since they too can harbor a lot of dust and grime.

Do this process until you no longer can see any loose fingerprint dust with your naked eye. Voila! You’re done with fixing half of the problem.

To fix the rest, just follow a few more simple steps.

Step 3: Clean the fingerprint dust

After you’ve cleaned all of the loose dust, it’s time for a second cleaning. You see, even if the floors look like they’re clean, you still have harmful lead and mercury residue on them.

Hence, without using a second cleanse, you’ll end up spreading this residue all over the home and your skin. Moreover, if you have any house pets, then this could also be potentially dangerous for them.

Depending on what surface you want to clean, the cleaning method may vary.

If you have hardwood floors

In case you have wood floors or furniture where you have spilled fingerprint dust, then the best way to remove it is by using some good old mineral spirit.

Simply soak an old towel with some mineral spirit and wipe the powdery surface. If you accidentally spill some, you can always clean up mineral spirits spill at home easily.

Next, take a wet rag and give a second rub so that the oily residue is removed.

If you have carpeted floors

However, if your floors are carpeted, then things may get a little lengthy. You’ll need to make a cleaning liquid to get the job done for you.

To do this, take a spray bottle and fill it with some lukewarm water. Next, add about half a teaspoon of dishwashing liquid into it. Now shake it super well until all of the soap is dissolved into the water and close the lid tightly.

Your soapy liquid is ready! Whether you’re looking to get rid of tree sap off windows or fingerprint dust from them, this soapy liquid is a great way to give a final cleanse.

Just spray it on your carpets, rugs, or sofa and use a sponge to gently give it a scrub. This will remove any of the leftover fingerprints dust and clean your home.

Always make sure that you don’t use any abrasive material to clean carpets or sofas. This can do more harm than good, as they ruin the texture and fiber of carpets.

Instead, use old towels or sponges, and always scrub gently in circular motions.

Step 4: Wipe off any residue

After you’ve done the cleaning, it’s time to give some final touch-ups. Now you may think that this extra step is overkill. However, wiping and letting the area dry is an important step even while hiding urine stains under black light.

At this point, take a clean towel and wipe any remaining cleaner left. This small step will ensure that whatever surface you’re cleaning stays intact for the longest time.

Just in case you didn’t know, leaving cleaners on your furniture or floors can actually make them lose their polish and shine faster.

Parting words

At this point, it’s time to part ways. However, this isn’t goodbye. If you enjoyed our post on how to remove fingerprint dust, make sure to let us know by commenting down below.

Whenever you have a problem of this sort, always keep calm and search for a solution.

Did you ever face a similar experience? Tell us how you tackled if and also if we missed anything. Until then, stay safe!